Both sub-compact · same Bobcat lineup

Bobcat CT1021 vs Bobcat CT1025

Bobcat CT1021

Bobcat

Bobcat CT1021

~$15,086

21 hp engine · 16.3 PTO−22% to the shaft
Bobcat CT1025

Bobcat

Bobcat CT1025

~$17,205

24.5 hp engine · 18.8 PTO−23% to the shaft

The Bobcat CT1021 lists about $2,119 lower; the Bobcat CT1025 carries 18.8 hp to the PTO against 16.3; the Bobcat CT1025 buys more PTO horsepower per dollar, 1.09 per $1,000 against 1.08.

Bobcat CT1021 and Bobcat CT1025 compared row by row. A highlighted cell takes that row on the stated rule: more power, lift, capacity or flow, or a lower price.
SpecBobcat CT1021Bobcat CT1025
Price~$15,086~$17,205
What that price isMSRP, base buildMSRP, base build
Size classSub-CompactSub-Compact
TransmissionHydrostaticHydrostatic
Engine hp21 hp24.5 hp
PTO hp16.3 hp18.8 hp
Loader lift608 lbsat max height608 lbsat max height
Three-point lift700 lbs24 in behind the lift points700 lbs24 in behind the lift points
Hydraulic flow7.2 GPM7.2 GPM
Drive4WD4WD
EngineDaedongDaedong
Weight1,521 lbs1,521 lbs
Fuel tank6.7 gal6.7 gal
4WDYesYes
Front loaderYesYes
Cab availableNoNo
HydrostaticYesYes
Power steeringYesYes
Cruise controlNoNo
Warrantynot publishednot published

A highlighted cell wins its row on the rule named above the table: more power, lift, capacity or flow, or a lower price. A lift row is left unwon whenever the two makers measured in different places, or where either of them did not say — a figure quoted at the pivot pin and one quoted 500 mm ahead of it describe the same loader and differ by roughly a third, so ranking them against each other would invent a result. Prices are typical list and move with dealer packages.

From owner discussion and long-term write-ups

What owners of each one say

Bobcat CT1021

What they like

  • Bobcat publishes the $15,086 starting figure on its own model page, so a dealer quote can be checked against the maker rather than guessed at
  • Under 25 hp, so the engine carries no diesel particulate filter and no regeneration cycle to interrupt a short job
  • 46 in of overall width clears most gate openings and fence lines, which is the entire reason the 1000 platform exists
  • Mid-PTO is standard, so a belly mower deck bolts on instead of requiring a drivetrain change
  • 7.2 gpm of total hydraulic flow is respectable under a 1,521 lb machine
  • The 3C100LWH-U2 three-cylinder is a Daedong engine, the same family Kioti sells under its own badge, so the block is not an orphan

What they complain about

  • 608 lb of loader lift at maximum height is the lowest figure in the Bobcat tractor range, which rules out most pallet work
  • 700 lb at 24 in behind the lift point keeps you on light Category 1 implements
  • No warranty term appears on the model page, so the coverage has to come out of the dealer's paperwork
  • 16.3 PTO hp leaves almost no margin for a rotary cutter in heavy grass
  • The starting price is the bare tractor - the loader is an added cost on top
  • Bobcat's tractor dealer coverage is thinner than Deere's or Kubota's across much of the country

Bobcat CT1025

What they like

  • 24.5 hp sits right at the regulatory line, making this the most powerful tractor Bobcat sells with no diesel particulate filter
  • 18.8 PTO hp for roughly $2,100 over the CT1021 is the cheapest horsepower step in the Bobcat tractor line
  • Two-range hydrostatic, 4WD and hydraulic power steering are all standard - nothing on the option sheet is needed to make it usable
  • Mid-PTO is standard for a mid-mount mower deck
  • The starting MSRP is published on the model page instead of being left entirely to the dealer

What they complain about

  • Loader lift stays at 608 lb at max height, so the extra engine power buys no lifting capacity at all
  • Three-point capacity is unchanged at 700 lb at 24 in behind the lift point
  • A 6.7 gal tank is small for a 24.5 hp engine doing loader work through a full day
  • No warranty term is published on the model page