Both compact · New Holland against Kioti

New Holland Workmaster 35 vs Kioti CK4040

New Holland Workmaster 35

New Holland

New Holland Workmaster 35

~$27,174

35 hp engine · 26.6 PTO−24% to the shaft
KiotiCK4040

Kioti

Kioti CK4040

~$27,569

39.5 hp engine · 33.3 PTO−16% to the shaft

The New Holland Workmaster 35 lists about $395 lower; the Kioti CK4040 carries 33.3 hp to the PTO against 26.6; the Kioti CK4040 lifts 1,657 lbs on the loader against 1,034; the Kioti CK4040 buys more PTO horsepower per dollar, 1.21 per $1,000 against 0.98.

New Holland Workmaster 35 and Kioti CK4040 compared row by row. A highlighted cell takes that row on the stated rule: more power, lift, capacity or flow, or a lower price.
SpecNew Holland Workmaster 35Kioti CK4040
Price~$27,174~$27,569
What that price isdealer list, not MSRPMSRP, base build
Size classCompactCompact
TransmissionHydrostaticGear
Engine hp35 hp39.5 hp
PTO hp26.6 hp33.3 hp
Loader lift1,034 lbsmeasuring point not recorded1,657 lbsat the pivot pin
Three-point lift1,808 lbsmeasuring point not recorded1,631 lbsmeasuring point not recorded
Hydraulic flow13 GPM11.3 GPM
Drive4WD4WD
EngineLSDaedong
Weight2,900 lbs2,734 lbs
Fuel tank7.4 gal9.0 gal
4WDYesYes
Front loaderYesYes
Cab availableNoYes
HydrostaticYesNo
Power steeringYesYes
Cruise controlNoNo
Warranty5 yr powertrain6 yr / unlimited hr powertrain

A highlighted cell wins its row on the rule named above the table: more power, lift, capacity or flow, or a lower price. A lift row is left unwon whenever the two makers measured in different places, or where either of them did not say — a figure quoted at the pivot pin and one quoted 500 mm ahead of it describe the same loader and differ by roughly a third, so ranking them against each other would invent a result. Prices are typical list and move with dealer packages.

From owner discussion and long-term write-ups

What owners of each one say

New Holland Workmaster 35

What they like

  • Consistently one of the cheapest name-brand 35 HP compacts - typically undercuts a comparable Kubota L2501 or Deere 3025E package by thousands
  • Backed by New Holland's dealer network and CNH parts system, so support is stronger than buying the equivalent LS-badged tractor
  • 26.6 PTO HP through the HST comfortably runs a 5-foot bush hog or tiller, more grunt than the 25 HP economy class it's priced against
  • 1,808 lb rear lift handles the common box blade, rotary cutter, and rear blade lineup without drama
  • 13 GPM total hydraulic flow is generous for an economy compact, so loader cycles don't feel sluggish
  • Choice of true 12x12 synchronized shuttle for gear fans or a smooth 3-range HST for loader-heavy work

What they complain about

  • It's an LS tractor in blue paint - that's fine mechanically, but some CNH dealers know the Workmaster compacts less well than their bigger tractors
  • Loader lift of roughly 1,034 lbs at the pin is modest - a Kioti CK2620 or LS MT225S out-lifts it at similar or lower cost
  • The 7.4-gallon fuel tank is small for a 35 HP machine and needs midday refills on long mowing days
  • No cruise control even on the HST, a comfort miss competitors include
  • Resale is decent but blue compacts don't hold value like orange and green ones do
  • No factory cab option in this series, so winter users must look elsewhere or add aftermarket
  • The hydrostatic drive is audibly louder at transport speed than Kubota's equivalent

Kioti CK4040

What they like

  • 33.3 PTO hp matches the CK4020, so nothing is given up where implements are driven
  • The CK4040SEHC cab is a factory configuration at $40,269, on the same chassis as the open-station tractor
  • Intercooled 3H-TH4A is the newer engine of the two 40 hp CK options
  • 72 months of powertrain coverage with no hour limit, and 24 months bumper-to-bumper covering parts and labor
  • 2,734 lb and 9.0 gal match the rest of the CK line, so ballast and implement choices carry straight over

What they complain about

  • $888 more than the CK4020 buys 0.1 hp less, 312 lb less loader lift and 0.4 gpm less flow - the tier premium is not visible on the spec sheet
  • 1,657 lb at the pivot pin is the weakest front end of any 39 hp machine in this catalog
  • 1,631 lb at the 3-point, the CK flat figure, with no measuring point stated
  • Steering type and aftertreatment are both absent from the model page