Sub-Compact against Compact · same Bobcat lineup
Bobcat CT1025 vs Bobcat CT2025
| Spec | Bobcat CT1025 | Bobcat CT2025 |
|---|---|---|
| Price | ~$17,205 | ~$20,760 |
| What that price is | MSRP, base build | MSRP, base build |
| Size class | Sub-Compact | Compact |
| Transmission | Hydrostatic | Gear |
| Engine hp | 24.5 hp | 24.5 hp |
| PTO hp | 18.8 hp | 22.2 hp |
| Loader lift | 608 lbsat max height | 1,369 lbsat max height |
| Three-point lift | 700 lbs24 in behind the lift points | 1,631 lbs24 in behind the lift points |
| Hydraulic flow | 7.2 GPM | 11.4 GPM |
| Drive | 4WD | 4WD |
| Engine | Daedong | Daedong |
| Weight | 1,521 lbs | 2,634 lbs |
| Fuel tank | 6.7 gal | 9 gal |
| 4WD | Yes | Yes |
| Front loader | Yes | Yes |
| Cab available | No | No |
| Hydrostatic | Yes | No |
| Power steering | Yes | Yes |
| Cruise control | No | No |
| Warranty | not published | not published |
A highlighted cell wins its row on the rule named above the table: more power, lift, capacity or flow, or a lower price. A lift row is left unwon whenever the two makers measured in different places, or where either of them did not say — a figure quoted at the pivot pin and one quoted 500 mm ahead of it describe the same loader and differ by roughly a third, so ranking them against each other would invent a result. Prices are typical list and move with dealer packages.
From owner discussion and long-term write-ups
What owners of each one say
Bobcat CT1025
What they like
- 24.5 hp sits right at the regulatory line, making this the most powerful tractor Bobcat sells with no diesel particulate filter
- 18.8 PTO hp for roughly $2,100 over the CT1021 is the cheapest horsepower step in the Bobcat tractor line
- Two-range hydrostatic, 4WD and hydraulic power steering are all standard - nothing on the option sheet is needed to make it usable
- Mid-PTO is standard for a mid-mount mower deck
- The starting MSRP is published on the model page instead of being left entirely to the dealer
What they complain about
- Loader lift stays at 608 lb at max height, so the extra engine power buys no lifting capacity at all
- Three-point capacity is unchanged at 700 lb at 24 in behind the lift point
- A 6.7 gal tank is small for a 24.5 hp engine doing loader work through a full day
- No warranty term is published on the model page
Bobcat CT2025
What they like
- 1,369 lb of loader lift at maximum height is more than double the 1000 platform's figure for about $3,500 more
- 1,631 lb at 24 in behind the lift point is a genuinely heavy hitch rating for a 24.5 hp tractor
- Still under 25 hp, so no diesel particulate filter and no regeneration cycle to plan work around
- 11.4 gpm combined flow - 6.9 implement plus 4.5 steering - leaves headroom for a third-function attachment
- The 9x3 manual is the cheaper of the two builds and keeps the transmission simple to service
- 9 gal of fuel under a 2,634 lb machine makes it behave much more like a compact than a sub-compact
What they complain about
- The 9x3 manual has no shuttle, so every direction change during loader work goes through the clutch
- The hydrostatic build costs $1,764 more, and that is before a loader is added to either one
- No cab is offered at this horsepower - open station only
- Choosing hydrostatic drops PTO output to 21.8 hp, so the transmission decision costs implement power
- Neither a warranty term nor a loader model name appears on the model page

