Both utility · Kioti against LS Tractor

Kioti RX6620 vs LS MT355E

KiotiRX6620

Kioti

Kioti RX6620

~$36,001

66 hp engine · 57.6 PTO−13% to the shaft
LS MT355E

LS Tractor

LS MT355E

~$35,809

55 hp engine · 44 PTO−20% to the shaft

The LS MT355E lists about $192 lower; the Kioti RX6620 carries 57.6 hp to the PTO against 44; the Kioti RX6620 lifts 3,384 lbs on the loader against 2,360; the Kioti RX6620 buys more PTO horsepower per dollar, 1.6 per $1,000 against 1.23.

Kioti RX6620 and LS MT355E compared row by row. A highlighted cell takes that row on the stated rule: more power, lift, capacity or flow, or a lower price.
SpecKioti RX6620LS MT355E
Price~$36,001~$35,809
What that price isMSRP, base builddealer list, not MSRP
Size classUtilityUtility
TransmissionPower ShuttleGear
Engine hp66 hp55 hp
PTO hp57.6 hp44 hp
Loader lift3,384 lbsat the pivot pin2,360 lbsmeasuring point not recorded
Three-point lift3,594 lbsmeasuring point not recorded2,910 lbsat the ball ends
Hydraulic flow17.9 GPM13 GPM
Drive4WD4WD
EngineDaedongLS
Weight5,148 lbs3,724 lbs
Fuel tank22.5 gal13.7 gal
4WDYesYes
Front loaderYesYes
Cab availableNoNo
HydrostaticNoNo
Power steeringYesYes
Cruise controlNoNo
Warranty4 yr / unlimited hr powertrain6 yr powertrain

A highlighted cell wins its row on the rule named above the table: more power, lift, capacity or flow, or a lower price. A lift row is left unwon whenever the two makers measured in different places, or where either of them did not say — a figure quoted at the pivot pin and one quoted 500 mm ahead of it describe the same loader and differ by roughly a third, so ranking them against each other would invent a result. Prices are typical list and move with dealer packages.

From owner discussion and long-term write-ups

What owners of each one say

Kioti RX6620

What they like

  • The power shuttle reverses under load with no clutch pedal, which is the single biggest comfort difference between this and the synchro-shuttle NX and DK models
  • 57.6 PTO hp handles Cat 2 implements that Kioti's sub-60 hp machines cannot drive
  • 3,594 lb at the 3-point and 3,384 lb at the loader pivot pin, both well clear of anything in the NX range
  • 22.5 gal of fuel, 50 percent more than the NX line, which is the difference between refilling at lunch and not
  • Four cylinders and 2,435 cc mean less strain per cylinder than the 1,826 cc three-cylinder Kioti stretches to 57.7 hp
  • $36,001 undercuts Kioti's own 57.7 hp NX6010H by $4,838 while adding 8.3 hp and a much larger hitch

What they complain about

  • Powertrain coverage drops to 48 months here - the RX and HX series do not get Kioti's 72-month term, which is the headline reason people shop the brand
  • 5,148 lb and a 133.9 in loader make this too much machine for mowing around a house
  • 17.9 gpm is the same flow as the 57.7 hp NX6010H, so the hydraulics did not scale with the engine
  • Kioti retired the plain RX6620 page; the shuttle-only version is gone and the power shuttle is now the only way to buy it
  • The 3,594 lb hitch rating carries no measuring point, so it is not comparable to a maker quoting lift at the ball ends

LS MT355E

What they like

  • 44 hp at the PTO is enough for a 6 ft rotary cutter and a 6 ft tiller without the engine working, and the HST build reads 46.7 hp
  • Same L3C19-T engine, same 2,910 lb Category 2 hitch and same LL4105 loader as the MT345E, so the ten extra horsepower is the only thing being paid for
  • Among the least expensive routes to 55 hp with four-wheel drive and a loader-capable front end anywhere in the US market
  • Two-year bumper-to-bumper and six-year powertrain cover, with no deductible

What they complain about

  • Carries the identical 2,360 lb loader and 13.0 GPM pump as the 45 hp MT345E, so the extra power does not reach the hydraulics at all
  • ROPS only - no cab is built on the MT3E frame
  • At 3,724 lb it is light for 55 hp, so it needs rear ballast or loaded tires before the front end can use the loader hard
  • 8x8 synchro shuttle only on the E, so direction changes go through the clutch
  • LS publishes no price and states no loader measuring point
  • The 13.7 gal tank is sized for a 45 hp machine, and at 55 hp it empties correspondingly faster